LED offers the same light output as the
KL2500 halogen unit but with the obvious
advantages of a high intensity LED engine;
no bulb changing, ripple free DC
illumination, low energy consumption and
daylight balanced output of 1000 lumens.
With its new design and unique performance
spectrum, the KL2500 LCD is setting a new
benchmark in the field of halogen cold light
sources. Fitted with a 250 watt cold light
reflector lamp, the KL2500 outputs twice the
light of the KL1500 LCD.
The Schott KL1600 white LED light source
offers continuous dimming, silent fan cooling
and a two position filter slider. Daylight
balanced 6000K at 650 lumens. Compatible with
all KL1500 lightguides and accessories.
The KL 1500
HAL is a 150-watt halogen cold light source
for use in industrial and life science
applications, Featuring high frequency
illumination (20 kHz), almost 100 CRI
halogen spectrum and continuous dimming from
0 to 100%.
light source offers a new, high brightness
LED light engine and is available in Cool
White (~6000K), Warm White (~3100K), Red
(625nm), Green (525nm) and Blue (470nm). The
unit may be controlled by RS232, Ethernet,
analogue 0-5V or manually using the
intensity control knob. Fast triggered
strobe up to 1KHz and full compatibility
with the Schott range of light guides and
ringlights. Schott LLS3 drawings, software
and manual are available
Ringlight Plus has 48 high brightness LEDs
with a colour temperature of 5600K.
Integrated controller for continuous dimming
from 100% to 0%, separate on/off switch and
segment control. Wide range of working
distances 50 - 130 mm.
Slim Ringlight offers brightfield and
darkfield illumination for stereo
microscopy. The free working distance may be
optimised using focusing lenses giving a
range from 20 to 90 mm for brightfield and 5
to 20 mm for darkfield.
controls the brightness, segment modes and
rotation of any VisiLED lighthead. This unit
offers continuous dimming from 100% to 0%,
four different illumination modes and
segment rotation in either direction.
ruggedised wound fibre bundles are coherent,
flexible fibre optic bundles used in
applications where images must be
transferred from remote locations. Standard
lengths range from 610 mm to 4500 mm. The
temperature resistance of these bundles can
range from -40°C to +150°C. Please contact
us with your requirements or click
here for the PDF
concept allows scalable lengths in multiples
of 300 mm up to 3 metres. Depending on the
LED type and the operating parameters, the
modular heat sink concept provides active
air cooling or optional water cooling.
Intensity control is performed by either an
analogue potentiometer with a constant
current or digitally by pulse width
modulation with frequencies up to 50 KHz.
Brian Reece Scientific Limited
supply Schott light sources, fibre optic light guides, LED
ringlights, backlights and spot lights.
Brian Reece Scientific Limited, 2 Weavers Cottage, West Mills, Newbury RG14 5HX Tel: +44 (0) 1635 36738 Email: email@example.com